This Bobcat Mustang 2054 skid steer hire loaders available for hire at Drogheda Hire are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels.
The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground.
With this Bobcat Mustang 2054 Skid Steer Hire, you will enjoy an unobstructed, panoramic view to the attachment and surrounding work areas.
There is hardly anything that can go wrong with this machine. This skid steer loader can be used in place of a large excavator by digging a hole from the inside. It then uses the ramp to carry material out of the hole. The skid loader reshapes the ramp making it steeper and longer as the excavation deepens.
Bobcat Mustang 2054 Skid Steer Hire
Engine
Make
Yanmar
Net Power
47 hp
Displacement
133.6 cu in
Operational
Operational Weight
2,750 kg
Fuel Capacity
14.3 gal
Max Speed
7.2 mph
Loader
Operating Load Rating
800 kg
Tipping Load
1,500 kg
Breakout Force
2,000 kg
Bucket Capacity
0.48 yd3
Dimensions
Length with Bucket
10.2 ft in
Length w/o Bucket
8.1 ft in
Width Over Tires
5.5 ft in
Height to Top of Cab
9.6 ft in
Clearance at Max Lift and Dump
7.7 ft in
Wheelbase
3.2 ft in
Ground Clearance
7.5 in
Reach at Max Lift and Dump
24 in
Turning Radius from Center - machine rear
59.2 in